Alligator Splice |
N/A
 An exceptionally strong metal splice which fastens mechanically and is very flexible. Splice components are locked into reinforced belt ends which are then meshed and joined by a pin. |
Edge Reinforcement |
N/A .005" or.010" PTFE coated fiberglass fabric attached to belt edge. Can be applied to both edges, on top, or top and bottom sides. Can be affixed by heat seal and/or stitching. Protects belt edges from wear, abrasion, and unraveling. Also adds support for belt driving/ tracking options. Edging color is natural brown. |
Overlap Splice |
N/A A standard splice in which the belt ends are overlapped from 1/2" to 2" and heat sealed together. A double fabric thickness will result. Excellent for most non-thickness-critical applications. Splice can be angled from 22° to 90°, and can be stitched for additional strength. |
Edge Reinforcement |
N/A Belt ends are butted. Fabric reinforcement is placed beneath the splice. Components are then joined by a heat seal. Splice can be angled from 22° to 90°. Perfect for applications requiring an uninterrupted belt work surface. Splice can be stitched for additional strength. |
Butt Splice |
N/A Dot Guides (Pins) Steel dot guides (also called pins) are riveted to one or both reinforced belt edges on standard 1 1/2" centers. Intended only for tracking purposes, the pins are designed to run through a machined groove in the conveyor roller. |
Belt Guiding- Dot Guides |
N/A
 Dot Guides (Pins) Steel dot guides (also called pins) are riveted to one or both reinforced belt edges on standard 1 1/2" centers. Intended only for tracking purposes, the pins are designed to run through a machined groove in the conveyor roller. |
Fabric Flap Over Splice |
N/A Brass grommets (also called eyelets) are mechanically inserted in one or both reinforced belt edges on standard 1 1/2" centers. The use of grommets on a belt also requires a matching sprocket on the conveyor roller. Positive belt driving and tracking can be accomplished by using this guiding system. |
Belt Guiding- Grommets |
N/A
 Brass grommets (also called eyelets) are mechanically inserted in one or both reinforced belt edges on standard 1 1/2" centers. The use of grommets on a belt also requires a matching sprocket on the conveyor roller. Positive belt driving and tracking can |
